Menu
Business Advice5 min

[VIDEO] LP® SmartSide® Lap Application Tips & Tricks

The beauty and versatility of LP® SmartSide® Trim and Siding have made our products a top pick among contractors and homeowners alike. If you’re ready to give your project a signature look with lap siding, here’s an LP Quick Tip to jump-start your siding remodel.

Tips for Installing Lap Siding

When installing lap siding with the butt-to-trim method, you must install your corner trim first. Accounting for slope, find the end of the wall that is closest to the ground and place a mark on your trim six inches from the ground. Measure from the mark up to the , and make a note of it.

Next, go to the other corner of the wall and measure down from the soffit panel the same distance as the other side, then make a mark. Use these two lower reference marks on your trim to ensure your first course of siding is level with the building and not the ground around it.

If you are installing 8-inch LP SmartSide lap siding, make a mark every 6⅞ inches up to the corner board. Now you can install a 3/8 x 1½-inch starter strip of siding to give the first course the proper angle. Install each course following your pencil marks while checking for level along the way. Be sure to place nails ¾-inch from the top edge of the lap siding to help keep your siding tight to the wall.

Build With Us®

LP offers many ideas for siding design using LP SmartSide siding profiles to give your project exceptional curb appeal. For complete application instructions for LP products, visit www.LPSmartSide.com.

Continue Reading

Business Solutions

4 min

Q&A: How Home Orientation Impacts Continuous Insulation

There’s a lot to consider when it comes to building an energy-efficient home for your clients and the many nuances that change with each build—including its orientation to the sun. We sat down with Neil Freidberg, Building Science Manager at LP, to unpack the impact of home orientation on continuous insulation needs. 

Continue Reading

Resiliency Solutions

5 min
HOW A RADIANT BARRIER CAN IMPROVE BURIED DUCT PERFORMANCE

One of the questions LP® Building Solutions gets from builders often is about burying ducts in attic insulation and whether combining radiant barrier sheathing with blown insulation over ductwork can benefit homeowners. As with most technical situations, the outcome depends on a nuanced approach. Let’s dig in and explore this question. 

Sustainability Solutions

8 min
How to Drive Effective Communication and Collaboration on the Jobsite

Every jobsite has a ton of moving parts, from product shipments, supplies, and schedules to subcontractors and homeowners. It’s no wonder that many project teams can struggle to maintain quality jobsite communication and collaboration throughout the building process. And when communication slips, construction companies inevitably deal with costly errors, inefficient workflows, delayed projects, or wasted time, leaving clients and the team frustrated.

Sustainability Solutions

6 min
Carbon Negative, Future Positive: LP® Structural Solutions Portfolio Releases Environmental Product Declarations

In an era where environmental responsibility is paramount, we are proud to announce a remarkable achievement: the LP® Structural Solutions portfolio has been officially designated as carbon negative. This milestone is a testament to our unwavering commitment to redefining construction materials for the better with a focus on sustainability, resiliency and groundbreaking advancements.